Availability: | |
---|---|
Quantity: | |
1LYX-230 1LYX-330 1LYX-430 1LYX-530
EUROSTAR OEM
8432100000
1LYX Series Disc Plough product description
1LYX series disc plough is connected with tractor three-point suspension, the plough rotates during operation, and the soil is ploughed, especially suitable for the ploughing operation of complex farmland with weeds, upright stems, large soil resistance, and brick and stone fragments in the soil. With no grass, no blocking, no choking, can cut off the crop stem and overcome the soil brick fragments, high efficiency, good operation quality, easy adjustment, durable and other characteristics.
1LYX Series Disc Plough product selling points
1. New type compact tractor disc plow has the feature of not Winding grass , not block and no hip building- up.
2. The disc ploughs are used to open the new fields and to process the stony areas.The disc plough is easy to cut off stems and roots .
3. High Carbon disc blade hardness: 38-44 HRC, assuring the toughness and wear ability of disc blade.
4. This 1LYX disc plough,disk plow,is mounted with four wheel tractor,as in conformity with the current agriculture conditions, are being produced with 2-3-4-5 rows.
5. It has compact structure and suitable for working on all various land. Working depth can reach 250-300mm.
6. The disc plough Matchable with tractor, it furrow soil when patches rotate, mainly applicable for complex land, such as weedy land, heavy soil, farmland with bricks and stones, etc.
7. Effectively avoid the plow disc is grass wrapped, not obstruction, can cut off stem of crop and overcome bricks and stones, with high efficiency, good quality work, easy to adjust, simple to use, durable, etc.
8. Disc plough can be mounted to 40-120 HP tractors with the operation is smooth without any troubles.
9. They are also suitable for working on terraced fields and small piece of farming land.
10. have the characteristics of short idle distance of travel on the edge of fields, high productivity, low oil consumption etc(etcetera).
11. It is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing.
12. Its special design allows to easier work in rocky and rooted areas.
13. It is specially useful in hard and dry trashy land.
1LYX series disc plough product parameters
Model | 1LYX-230 | 1LYX-330 | 1LYX-430 | 1LYX-530 |
Overall dimension (mm) | 1650x1150x1200 | 2300x1400x1200 | 2950x1730x1200 | 3687x2163x1200 |
Weight (kg) | 320 | 450 | 540 | 600 |
Working width (mm) | 600 | 900 | 1200 | 1500 |
Working depth (mm) | 250 | 250 | 250 | 250 |
Nos of disc blade | 2 | 3 | 4 | 5 |
Dia of disc | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " |
Matched power (hp) | 40-50 | 70 | 90-100 | 120 |
Productivity (ha/h) | 0.3 | 0.45 | 0.6 | 0.75 |
Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
1LYX Series Disc Plough product description
1LYX series disc plough is connected with tractor three-point suspension, the plough rotates during operation, and the soil is ploughed, especially suitable for the ploughing operation of complex farmland with weeds, upright stems, large soil resistance, and brick and stone fragments in the soil. With no grass, no blocking, no choking, can cut off the crop stem and overcome the soil brick fragments, high efficiency, good operation quality, easy adjustment, durable and other characteristics.
1LYX Series Disc Plough product selling points
1. New type compact tractor disc plow has the feature of not Winding grass , not block and no hip building- up.
2. The disc ploughs are used to open the new fields and to process the stony areas.The disc plough is easy to cut off stems and roots .
3. High Carbon disc blade hardness: 38-44 HRC, assuring the toughness and wear ability of disc blade.
4. This 1LYX disc plough,disk plow,is mounted with four wheel tractor,as in conformity with the current agriculture conditions, are being produced with 2-3-4-5 rows.
5. It has compact structure and suitable for working on all various land. Working depth can reach 250-300mm.
6. The disc plough Matchable with tractor, it furrow soil when patches rotate, mainly applicable for complex land, such as weedy land, heavy soil, farmland with bricks and stones, etc.
7. Effectively avoid the plow disc is grass wrapped, not obstruction, can cut off stem of crop and overcome bricks and stones, with high efficiency, good quality work, easy to adjust, simple to use, durable, etc.
8. Disc plough can be mounted to 40-120 HP tractors with the operation is smooth without any troubles.
9. They are also suitable for working on terraced fields and small piece of farming land.
10. have the characteristics of short idle distance of travel on the edge of fields, high productivity, low oil consumption etc(etcetera).
11. It is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing.
12. Its special design allows to easier work in rocky and rooted areas.
13. It is specially useful in hard and dry trashy land.
1LYX series disc plough product parameters
Model | 1LYX-230 | 1LYX-330 | 1LYX-430 | 1LYX-530 |
Overall dimension (mm) | 1650x1150x1200 | 2300x1400x1200 | 2950x1730x1200 | 3687x2163x1200 |
Weight (kg) | 320 | 450 | 540 | 600 |
Working width (mm) | 600 | 900 | 1200 | 1500 |
Working depth (mm) | 250 | 250 | 250 | 250 |
Nos of disc blade | 2 | 3 | 4 | 5 |
Dia of disc | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " | 710mm"X6 " |
Matched power (hp) | 40-50 | 70 | 90-100 | 120 |
Productivity (ha/h) | 0.3 | 0.45 | 0.6 | 0.75 |
Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
1LYX series disc plough pictures show
1LF series hydraulic flip plow product parameters
Model | 1LF-330 | 1LF-430 | 1LF-530 |
Max .Working width(mm) | 900 | 1200 | 1500 |
working depth | 160-250 | 160-250 | 160-250 |
Linkage | Three-point suspension II type | Three-point suspension II type | Three-point suspension II type |
Work efficiency(Ha/h) | 5.5-7.5 | 7.5-9 | 10-12.5 |
Matched power(hp) | 50-65 | 65-90 | 100-120 |
No of disc(pc) | 6 | 8 | 10 |
Weight(Kg) | 550 | 750 | 980 |
1LF series hydraulic grille flip plough product parameters
Modle | 1LF-345 | 1LF-445 | 1LF-545 |
Number of bottoms | 6 | 8 | 10 |
Working width(mm) | 1350 | 1800 | 2250 |
Working depth(mm) | 350-400 | 350-400 | 350-400 |
weight(kg) | 1000 | 1200 | 1400 |
Matched power(hp) | 120-150 | 150-180 | 180-240 |
Linkage | (Standard three-point mounted) | (Standard three-point mounted) | (Standard three-point mounted) |
1L series furrow plough product parameters
Model | 1L-220 | 1L-320 | 1L-420 | 1L-520 | 1L-225 | 1L-325 | 1L-425 | 1L-525 | 1L-625 |
Weight(kg) | 60 | 100 | 155 | 180 | 125 | 160 | 210 | 260 | 300 |
Matched power(hp) | 12-20 | 25-30 | 35-40 | 45-50 | 28-30 | 30-45 | 40-50 | 60-65 | 70-75 |
Linkage | Three-point suspension | Three-point suspension | |||||||
Working width(mm) | 400 | 600 | 800 | 1000 | 500 | 750 | 1000 | 1250 | 1600 |
Working depth(mm) | 180-250 | 200-250 | |||||||
No. of plowbody(pcs) | 2 | 3 | 4 | 5 | 2 | 3 | 4 | 5 | 6 |
Model | 1L-330 | 1L-430 | 1L-530 | 1L-335 | 1L-435 | 1L-535 | 1L-635 |
Weight(kg) | 240 | 310 | 380 | 280 | 320 | 370 | 420 |
Matched power(hp) | 50-55 | 60-75 | 80-100 | 50-75 | 80-100 | 100 | 120 |
Linkage | Three-point suspension | Three-point suspension | |||||
Working width(mm) | 900 | 1200 | 1500 | 1050 | 1400 | 1700 | 2100 |
Working depth(mm) | 260-300 | 285-350 | |||||
No. of plowbody(pcs) | 3 | 4 | 5 | 3 | 4 | 5 | 6 |
1LY series disc plough product parameters
Model | 1LY-2 | 1LY-3 | 1LY-4 | 1LY-5 |
Working width(mm) | 600 | 900 | 1200 | 1500 |
Working depth(mm) | 250~300 | 250~300 | 250~300 | 250~300 |
Q'ty of disc | 2 | 3 | 4 | 5 |
Total weight(kg) | 350 | 400 | 470 | 560 |
Matched power(hp) | 40 | 60 | 80 | 120 |
Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
1LYT series disc plough product parameters
Model | 1LYT-220 | 1LYT-320 | 1LYT-420 | 1LYT-325 | 1LYT-425 | 1LYT-525 | 1LYT-625 | 1LYT-230 | 1LYT-330 | 1LYT-430 |
Working Width (mm) | 400 | 600 | 800 | 750 | 1000 | 1250 | 1500 | 600 | 900 | 1200 |
Working Depth (mm) | 200 | 250-300 | 300 | |||||||
Qty. of Disc (pc) | 2 | 3 | 4 | 3 | 4 | 5 | 6 | 2 | 3 | 4 |
Dia. of Disc (mm) | 510*4 | 510*4 | 510*4 | 660*6 | 710*6 | |||||
Linkage | Three-point suspension | Three-point suspension | Three points suspension | |||||||
Matched Power (hp) | 21-30 | 25-35 | 30-40 | 50-65 | 65-85 | 80-100 | 100-120 | 55-70 | 60-80 | 80-100 |
1LYQ series driving disc plough product parameters
Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
Overall dimension(mm) | 1325*2025*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2025*1050 | 1440*2265*1050 | 1555*2465*1050 |
number of disc (pec) | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
Working width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
working depth(mm) | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 |
Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
Rotating speed of cutter shaft(r/min) | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 |
Matched power(hp) | 15-18 | 18-22 | 25-40 | 40-50 | 50-60 | 60-80 | 80-90 |
overall weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
Linkage | Three-point suspension | Three-point suspension |
Full series of share plow, turnover plow, disc plow picture combination display
Full range of disc harrow picture display
ES series disc blade Product parameters
Diameter | Thickness | Weight Plain | Weight Notched | ||||
MM | INCH | MM | INCH | KG | LBS | KG | LBS |
300mm | 12" | 3 | 1/8" | 1.6 | 3.5 | 1.1 | 2.4 |
330mm | 13" | 3 | 1/8" | 1.8 | 4 | 1.2 | 2.6 |
360mm | 14" | 3 | 1/8" | 2.3 | 4.9 | 1.9 | 4.1 |
410mm | 16" | 3 | 1/8" | 3.2 | 7 | 2.7 | 5.9 |
460mm | 18" | 3 | 1/8" | 4.3 | 9.5 | 3.8 | 8.4 |
460mm | 18" | 3.5 | 1/7" | 4.6 | 10.2 | 4.1 | 9 |
510mm | 20" | 3.5 | 1/7" | 5.8 | 12.7 | 5.6 | 11.5 |
510mm | 20" | 4 | 2/13" | 6.5 | 14.4 | 5.8 | 12.7 |
560mm | 22" | 4 | 2/13" | 8.1 | 18 | 7.5 | 16.5 |
560mm | 22" | 4.5 | 2/11" | 9 | 20 | 8.5 | 18.7 |
560mm | 22" | 5 | 1/5" | 9.5 | 21.6 | 9 | 19.8 |
560mm | 22" | 6 | 15/64" | 12 | 26.5 | 11 | 24.2 |
610mm | 24" | 5 | 1/5" | 11.3 | 25 | 10.5 | 23.1 |
610mm | 24" | 6 | 15/64" | 14.2 | 31.5 | 13 | 28.6 |
660mm | 26" | 5 | 1/5" | 14.1 | 31 | 13 | 28.6 |
660mm | 26" | 6 | 15/64" | 17 | 37.5 | 15.8 | 34.8 |
660mm | 26" | 7 | 9/32" | 20 | 43.5 | 18.5 | 40.7 |
660mm | 26" | 8 | 5/16" | 23 | 51 | 21 | 46 |
710mm | 28" | 6 | 15/64" | 20 | 44 | 18.5 | 40.7 |
710mm | 28" | 7 | 9/32" | 23 | 50.6 | 21.5 | 46 |
710mm | 28" | 8 | 5/16" | 26 | 57.2 | 24 | 52.1 |
760mm | 30" | 8 | 5/16" | 29 | 64 | 28 | 61.5 |
760mm | 30" | 10 | 3/8" | 35 | 77 | 33.5 | 73.7 |
810mm | 32" | 8 | 5/16" | 35 | 77 | 33 | 75 |
810mm | 32" | 10 | 3/8" | 43 | 95 | 40 | 68 |
910mm | 36" | 12 | 1/2" | 68 | 150 | 60 | 132 |
960mm | 38" | 12 | 1/2" | 77 | 170 | 70 | 154 |
1016mm | 40" | 12 | 1/2" | 82 | 180 | 77 | 169.4 |
1116mm | 44" | 12 | 1/2" | 89 | 196 | 84 | 184.8 |
1LYX series disc plough pictures show
1LF series hydraulic flip plow product parameters
Model | 1LF-330 | 1LF-430 | 1LF-530 |
Max .Working width(mm) | 900 | 1200 | 1500 |
working depth | 160-250 | 160-250 | 160-250 |
Linkage | Three-point suspension II type | Three-point suspension II type | Three-point suspension II type |
Work efficiency(Ha/h) | 5.5-7.5 | 7.5-9 | 10-12.5 |
Matched power(hp) | 50-65 | 65-90 | 100-120 |
No of disc(pc) | 6 | 8 | 10 |
Weight(Kg) | 550 | 750 | 980 |
1LF series hydraulic grille flip plough product parameters
Modle | 1LF-345 | 1LF-445 | 1LF-545 |
Number of bottoms | 6 | 8 | 10 |
Working width(mm) | 1350 | 1800 | 2250 |
Working depth(mm) | 350-400 | 350-400 | 350-400 |
weight(kg) | 1000 | 1200 | 1400 |
Matched power(hp) | 120-150 | 150-180 | 180-240 |
Linkage | (Standard three-point mounted) | (Standard three-point mounted) | (Standard three-point mounted) |
1L series furrow plough product parameters
Model | 1L-220 | 1L-320 | 1L-420 | 1L-520 | 1L-225 | 1L-325 | 1L-425 | 1L-525 | 1L-625 |
Weight(kg) | 60 | 100 | 155 | 180 | 125 | 160 | 210 | 260 | 300 |
Matched power(hp) | 12-20 | 25-30 | 35-40 | 45-50 | 28-30 | 30-45 | 40-50 | 60-65 | 70-75 |
Linkage | Three-point suspension | Three-point suspension | |||||||
Working width(mm) | 400 | 600 | 800 | 1000 | 500 | 750 | 1000 | 1250 | 1600 |
Working depth(mm) | 180-250 | 200-250 | |||||||
No. of plowbody(pcs) | 2 | 3 | 4 | 5 | 2 | 3 | 4 | 5 | 6 |
Model | 1L-330 | 1L-430 | 1L-530 | 1L-335 | 1L-435 | 1L-535 | 1L-635 |
Weight(kg) | 240 | 310 | 380 | 280 | 320 | 370 | 420 |
Matched power(hp) | 50-55 | 60-75 | 80-100 | 50-75 | 80-100 | 100 | 120 |
Linkage | Three-point suspension | Three-point suspension | |||||
Working width(mm) | 900 | 1200 | 1500 | 1050 | 1400 | 1700 | 2100 |
Working depth(mm) | 260-300 | 285-350 | |||||
No. of plowbody(pcs) | 3 | 4 | 5 | 3 | 4 | 5 | 6 |
1LY series disc plough product parameters
Model | 1LY-2 | 1LY-3 | 1LY-4 | 1LY-5 |
Working width(mm) | 600 | 900 | 1200 | 1500 |
Working depth(mm) | 250~300 | 250~300 | 250~300 | 250~300 |
Q'ty of disc | 2 | 3 | 4 | 5 |
Total weight(kg) | 350 | 400 | 470 | 560 |
Matched power(hp) | 40 | 60 | 80 | 120 |
Linkage | Three-point suspension | Three-point suspension | Three-point suspension | Three-point suspension |
1LYT series disc plough product parameters
Model | 1LYT-220 | 1LYT-320 | 1LYT-420 | 1LYT-325 | 1LYT-425 | 1LYT-525 | 1LYT-625 | 1LYT-230 | 1LYT-330 | 1LYT-430 |
Working Width (mm) | 400 | 600 | 800 | 750 | 1000 | 1250 | 1500 | 600 | 900 | 1200 |
Working Depth (mm) | 200 | 250-300 | 300 | |||||||
Qty. of Disc (pc) | 2 | 3 | 4 | 3 | 4 | 5 | 6 | 2 | 3 | 4 |
Dia. of Disc (mm) | 510*4 | 510*4 | 510*4 | 660*6 | 710*6 | |||||
Linkage | Three-point suspension | Three-point suspension | Three points suspension | |||||||
Matched Power (hp) | 21-30 | 25-35 | 30-40 | 50-65 | 65-85 | 80-100 | 100-120 | 55-70 | 60-80 | 80-100 |
1LYQ series driving disc plough product parameters
Model | 1LYQ-320 | 1LYQ-420 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 |
Overall dimension(mm) | 1325*2025*1050 | 965*1365*1050 | 1075*1585*1050 | 1210*1805*1050 | 1325*2025*1050 | 1440*2265*1050 | 1555*2465*1050 |
number of disc (pec) | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
the dia of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
Working width(mm) | 660 | 880 | 1100 | 1320 | 1540 | 1760 | 1980 |
working depth(mm) | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 | 200-240 |
Rotating speed of input shaft(r/min) | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 | 540/720 |
Rotating speed of cutter shaft(r/min) | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 | 90-120 |
Matched power(hp) | 15-18 | 18-22 | 25-40 | 40-50 | 50-60 | 60-80 | 80-90 |
overall weight (kg) | 210 | 240 | 276 | 321 | 357 | 393 | 430 |
Linkage | Three-point suspension | Three-point suspension |
Full series of share plow, turnover plow, disc plow picture combination display
Full range of disc harrow picture display
ES series disc blade Product parameters
Diameter | Thickness | Weight Plain | Weight Notched | ||||
MM | INCH | MM | INCH | KG | LBS | KG | LBS |
300mm | 12" | 3 | 1/8" | 1.6 | 3.5 | 1.1 | 2.4 |
330mm | 13" | 3 | 1/8" | 1.8 | 4 | 1.2 | 2.6 |
360mm | 14" | 3 | 1/8" | 2.3 | 4.9 | 1.9 | 4.1 |
410mm | 16" | 3 | 1/8" | 3.2 | 7 | 2.7 | 5.9 |
460mm | 18" | 3 | 1/8" | 4.3 | 9.5 | 3.8 | 8.4 |
460mm | 18" | 3.5 | 1/7" | 4.6 | 10.2 | 4.1 | 9 |
510mm | 20" | 3.5 | 1/7" | 5.8 | 12.7 | 5.6 | 11.5 |
510mm | 20" | 4 | 2/13" | 6.5 | 14.4 | 5.8 | 12.7 |
560mm | 22" | 4 | 2/13" | 8.1 | 18 | 7.5 | 16.5 |
560mm | 22" | 4.5 | 2/11" | 9 | 20 | 8.5 | 18.7 |
560mm | 22" | 5 | 1/5" | 9.5 | 21.6 | 9 | 19.8 |
560mm | 22" | 6 | 15/64" | 12 | 26.5 | 11 | 24.2 |
610mm | 24" | 5 | 1/5" | 11.3 | 25 | 10.5 | 23.1 |
610mm | 24" | 6 | 15/64" | 14.2 | 31.5 | 13 | 28.6 |
660mm | 26" | 5 | 1/5" | 14.1 | 31 | 13 | 28.6 |
660mm | 26" | 6 | 15/64" | 17 | 37.5 | 15.8 | 34.8 |
660mm | 26" | 7 | 9/32" | 20 | 43.5 | 18.5 | 40.7 |
660mm | 26" | 8 | 5/16" | 23 | 51 | 21 | 46 |
710mm | 28" | 6 | 15/64" | 20 | 44 | 18.5 | 40.7 |
710mm | 28" | 7 | 9/32" | 23 | 50.6 | 21.5 | 46 |
710mm | 28" | 8 | 5/16" | 26 | 57.2 | 24 | 52.1 |
760mm | 30" | 8 | 5/16" | 29 | 64 | 28 | 61.5 |
760mm | 30" | 10 | 3/8" | 35 | 77 | 33.5 | 73.7 |
810mm | 32" | 8 | 5/16" | 35 | 77 | 33 | 75 |
810mm | 32" | 10 | 3/8" | 43 | 95 | 40 | 68 |
910mm | 36" | 12 | 1/2" | 68 | 150 | 60 | 132 |
960mm | 38" | 12 | 1/2" | 77 | 170 | 70 | 154 |
1016mm | 40" | 12 | 1/2" | 82 | 180 | 77 | 169.4 |
1116mm | 44" | 12 | 1/2" | 89 | 196 | 84 | 184.8 |
Factory introduction
Shandong Euro Star Machinery Manufacture Co., Ltd. is a professional Machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. The company's products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on.
As a professional machinery equipment manufacturer in China, the company has committed itself to provide all-round solution to global modern agricultural mechanization. The company has integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of eurostar in the world step by step.
The company has passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole.
Supported by comprehensive quality assurance system and developed sales and service network, the company has made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, Most of the company's products have passed the European CE certification.products are exported to Europe, America, Latin America, the Middle East, Asia-Pacific, CIS, Africa and more than 80 countries and regions.Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Aiming at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, the company will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.
Tractor production workshop display
Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.
1) Market service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified
2) Spare parts service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.
3) Training service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-one special assignment training;
Remote online network training;
4) Technical support
The whole process Technology support covers on sale and after-sale service.
Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB Qingdao and CIF your destination for your choice
3). Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business
FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar' s warm reception, trustworthy and efficient professional services and persistent care.
How shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and ocean service.
What is the machine advantage? Why I choose from you ?
A: Adopting world famous brand engine and parts, ensure long life service, all the structure parts are produced and checked by our engineers.Each machine is carefully tested before send to customer.Warranty time for 1 year or 1200 working hours.
How many units can be put in container?
A: 1-2 units can be in a 20ft container, 2-3 units can be in a 40HQ container.will be fixed with wire ropes.
Are you able to export less than 1 container of mini excavator ? And what's the wooden box's dimension and total weight ?
A:Yes ,if 1 unit or 2 units mini excavator machine could shipment by LCL, wooden box; if 4 unit or more than 4 units suggest used 20ft container. If do not have trailer, the wooden box dimension is 2.8x1.12x1.4m , about 4.3m3; if have trailer the wooden box dimension is 2.8x1.4x1.8m,about 7.54m3. Total weight about 1000kg.
Contact us
Mr. Duke Zhang
Shandong Euro Star Machinery Manufacture Co., Ltd.
Add: 198 Changning Street, Fangzi District, Weifang City, Shandong Province,P.R.C.
Web:eurostartractor.en.made-in-china.com
EUROSTAR CUSTOMERS ALL OVER THE WORLD
Factory introduction
Shandong Euro Star Machinery Manufacture Co., Ltd. is a professional Machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. The company's products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on.
As a professional machinery equipment manufacturer in China, the company has committed itself to provide all-round solution to global modern agricultural mechanization. The company has integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of eurostar in the world step by step.
The company has passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole.
Supported by comprehensive quality assurance system and developed sales and service network, the company has made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, Most of the company's products have passed the European CE certification.products are exported to Europe, America, Latin America, the Middle East, Asia-Pacific, CIS, Africa and more than 80 countries and regions.Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Aiming at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, the company will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.
Tractor production workshop display
Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.
1) Market service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified
2) Spare parts service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.
3) Training service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-one special assignment training;
Remote online network training;
4) Technical support
The whole process Technology support covers on sale and after-sale service.
Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB Qingdao and CIF your destination for your choice
3). Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business
FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar' s warm reception, trustworthy and efficient professional services and persistent care.
How shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and ocean service.
What is the machine advantage? Why I choose from you ?
A: Adopting world famous brand engine and parts, ensure long life service, all the structure parts are produced and checked by our engineers.Each machine is carefully tested before send to customer.Warranty time for 1 year or 1200 working hours.
How many units can be put in container?
A: 1-2 units can be in a 20ft container, 2-3 units can be in a 40HQ container.will be fixed with wire ropes.
Are you able to export less than 1 container of mini excavator ? And what's the wooden box's dimension and total weight ?
A:Yes ,if 1 unit or 2 units mini excavator machine could shipment by LCL, wooden box; if 4 unit or more than 4 units suggest used 20ft container. If do not have trailer, the wooden box dimension is 2.8x1.12x1.4m , about 4.3m3; if have trailer the wooden box dimension is 2.8x1.4x1.8m,about 7.54m3. Total weight about 1000kg.
Contact us
Mr. Duke Zhang
Shandong Euro Star Machinery Manufacture Co., Ltd.
Add: 198 Changning Street, Fangzi District, Weifang City, Shandong Province,P.R.C.
Web:eurostartractor.en.made-in-china.com
EUROSTAR CUSTOMERS ALL OVER THE WORLD
Full range of tractor products display
Our company produces other agricultural machinery display
Full range of tractor products display
Our company produces other agricultural machinery display